Steps in Installing a Storm Window

Steps in Installing a Storm Window

Installing storm windows in your home can be a major upgrade and will greatly increase the value of your home. You can easily install a single or double pane of glass, depending on your style preference. There are a few basic steps you should follow if you want to get the most out of your new window.

First, determine if you need a double pane or single pane. If you choose to install a single pane, you will need to measure the room where you want the window placed and buy the right sized window. Some single-pane models only allow for one large window, whereas others can be double paned. You can also choose between sliding windows and casement windows. A sliding window is a great way to allow more light into your room while still providing an unobstructed view of the outdoors.

Next, decide on the style of window that you want. There are many types of doors and glass panels from which to choose including French doors, sliding doors, casement doors, and double-paned windows. It’s important to know which design of the door or window will best work with your home and the type of windows you have before you purchase any of these products.

Be sure to include any additional items of equipment that you’ll need. The most common pieces of equipment used in a storm window installation are hinges, louvers, and seals. These are all easily found at the store that you purchased your window from or online. Before you buy anything though, it’s a good idea to check to see if your local building codes will allow you to install the window using any of these items. Make sure that they’re legal to do so before purchasing any items.

Once you have all the materials you need and installed everything, check to make sure everything is properly secured. Be sure to use double-sided tape for this purpose and use the appropriate tools and adhesive. If you’ve installed an overhead panel, you’ll need to anchor it to the ceiling joists. If you’ve installed a casement window, you’ll need to nail the shutter to the wall. Finally, if you’ve installed sliding glass panels, you’ll need to anchor them to the tracks and slide the panels in place. If your windows are hanging from the ceiling, you’ll need to nail the bottom boards to the floor. If your windows are on a casement window, you’ll need to screw the bottom to the wall or the frame.

Once all of these steps are done, install the window the following steps: Secure the shutter and latch to the ceiling and secure the louvers to the interior side of the window. Install the doors to the window and secure them. Once all the panels are installed, ensure that the louvers are securely mounted, and the seals are installed and the windows are closed. To make sure that the installation is done perfectly hire a reliable window contractor.