Whether you’re looking to improve the look of your home or you’re a do-it-yourself type, there are certain steps to follow to ensure a successful hardwood flooring installation. When installing hardwood flooring, it is important to consider the space’s current temperature and humidity. These are factors that affect the hardness of the wood. If the hardwood isn’t acclimated properly, it could cause problems with long-term use.
You need to allow at least three to five days for the wood to acclimate. This will vary depending on the wood species you choose and the conditions in your home. For example, a harder wood may take longer to acclimate than a softer one. Taking moisture readings on the subfloors or inside the room will help determine how long you need to wait for the hardwood to acclimate. If you’re using a hardwood that needs to be acclimated, it should be installed perpendicular to the joists.
In order to install hardwood flooring, you need to remove the existing floor. This will take time and require careful planning. If you are removing old flooring, make sure you wear work gloves and a safety mask. You also want to wear knee pads and ear protection when working with a saw. It’s a good idea to check with a Better Business Bureau to make sure the contractor is properly licensed and bonded.
After you’ve removed the old flooring, you’ll need to plan out your hardwood flooring installation. You’ll want to decide whether you’ll be installing straight boards or racking boards. You’ll also want to make sure you have plenty of room for expansion. You’ll need to stagger your joints so you don’t have large gaps between them. If you are installing diagonal surfaces, you’ll want to give yourself a 10 percent allowance.
When installing your new flooring, be sure to use the correct fasteners and sand your floor. For hardwood, you’ll want to use two nails per board. The manufacturer recommends spacing your nails at least six inches apart. It is a good idea to use a compressor to power a variety of nailers. If you choose to use a pneumatic nail gun, wear steel-toed boots to protect your feet.
Once you’ve completed your hardwood flooring installation, you’ll want to keep it looking nice. If you’re installing unfinished hardwood, you’ll need to sand the boards and stain them. You’ll also need to protect your floors with a protective finish. Depending on your wood type, you’ll need to apply stain, oil, or polyurethane.
When you’re preparing to install your hardwood, be sure to use a safety mask and knee pads. You’ll also want to use a chalk line to help guide you as you cut and sand the boards.
If you are unsure about how to do a hardwood flooring installation, it’s a good idea to call in a professional. Professional installers will be able to walk you through the entire process, from removal of old flooring to installation of your new hardwood. They will also clean up the area and put back your furniture. For more detail on flooring repair and installation visit https://www.stpetehandyman.net/.